Nexmosphere Sensor configuration

To enable sensor configuration on device you have to navigate yourself to
Manage screens > Device properties > Set sensor configuration

USB communication

USB COMMUNICATION

If you wish to use Nexmosphere on JsCore devices, please make sure your configuration contains "port":"string" in connection, otherwise the sensors will not work.

• Brightsign devices use port 2 as communication port, so the connection must contain "port":"2"
• ANDROID AND WINDOWS DEVICES CANNOT USE THE "port":"string", SO THE CONFIGURATION SHOULD NOT CONTAIN IT.

SERIAL (RS-232) communication

SERIAL (RS-232) COMMUNICATION

In order to use nexmosphere sensors with serial (RS-232) connection it is required to fill the connection with additional information.

"connection":{
        "port":"0",
        "parity":0,
        "baudrate":115200,
        "dataBits":8,
        "stopBits":1,
        "flowControl":0
      }

• To use serial (RS-232) connection you have to define 0 as communication port, so the connection must contain "port":"0", except Lg devices, where you have to use port 3 as communication port, so the connection must contain "port":"3"

SERIAL (RS-232) communication on LG devices

LG devices support only serial (RS-232) sensor connection.

Please note

In order to use nexmosphere sensors on LG devices it is required to fill the connection with additional information.

• Lg devices use port 3 as communication port, so the connection must contain "port":"3"

Configuration for serial (RS-232) communication on LG

{
  "services":[
    {
      "uid":"nexmosphere",
      "type":"GENERIC",
      "settings":{
        "rules":[
          {
            "pattern":"(\\w\\d{3}\\w)\\[(\\d*)]",
            "idGroupIndex":1,
            "valueGroupIndex":2
          },
          {
            "pattern":"(\\w\\d{3}\\w)\\[(TR|TD)=UID:([A-Za-z0-9]*)]",
            "idGroupIndex":1,
            "eventGroupIndex":2,
            "valueGroupIndex":3
          },
          {
            "pattern":"(\\w\\d{3}\\w)\\[(\\w*)=([A-Za-z0-9]*)]",
            "idGroupIndex":1,
            "eventGroupIndex":2,
            "valueGroupIndex":3
          }
        ]
      },
      "connection":{
        "port":"3",
        "parity":0,
        "baudrate":115200,
        "dataBits":8,
        "stopBits":1,
        "flowControl":0
      }
    }
  ]
}

Connection on Windows & Android devices

Additional Information

ANDROID AND WINDOWS DEVICES CANNOT USE THE "port":"string", SO THE CONFIGURATION SHOULD NOT CONTAIN IT.

Default configuration

{
	"services": [
		{
			"uid": "nexmosphere",
			"type": "GENERIC",
			"connection": {
				"baudrate": 115200
			},
			"settings": {
				"rules": [
					{
						"pattern": "(\\w\\d{3}\\w)\\[(\\d*)]\r\n",
						"eventGroupIndex": 1,
						"valueGroupIndex": 2
					},
					{
						"pattern": "(\\w\\d{3}\\w)\\[(TR|TD)=UID:([A-Za-z0-9]*)]\r\n",
						"idGroupIndex": 1,
						"eventGroupIndex": 2,
						"valueGroupIndex": 3
					},
					{
						"pattern": "(\\w\\d{3}\\w)\\[(\\w*)=([A-Za-z0-9]*)]\r\n",
						"idGroupIndex": 1,
						"eventGroupIndex": 2,
						"valueGroupIndex": 3
					}
				]
			}
		}
	]
}