Skip to main content

About the Wallboard Toolbox application

This article introduces you to the Wallboard toolbox and its functions.

What is the Wallboard Toolbox?

Wallboard Toolbox is an all-in-one application by Wallboard used to whitelabel and firmware flash Giada devices and install Wallboard on E Ink displays (Sharp, Philips).

Wallboard Toolbox installation

  1. Download the Toolbox application from here.
  2. Unzip it to any location.
  3. Run WallboardToolbox.exe as Administrator.

Wallboard Toolbox application

When launching Wallboard Toolbox you will be greeted by a Welcome screen. Here you can access additional settings for troubleshooting or debugging purposes by clicking the Gear icon in the top right corner of the application.

Welcome

Welcome

  • Show application logs will open the application log file in the system's default text editor.
  • Enable debug mode (Sharp) will enable the debug mode on Sharp E-Ink devices, which will allow connection to the device with ADB(Android Debug Bridge).
  • Show device status will show the current settings of the device.
  • Download device log will save the device logs into the tmp folder of the Wallboard Toolbox application.
  • Install RockUsb driver will install the driver necessary for connecting to Giada devices.

To start the installation process simply click Start and choose your device.

Welcome

We have made separate articles for each device:

You can go to our Giada installation guide by clicking here.

You can go to our E Ink application installation guide by clicking here.

Tip!

If you have further questions please do not hesitate to contact us at support@wallboard.info.