Standard installation on Samsung

Download the application

Please note

Before downloading our Samsung client's installer please make sure you visit Supported Samsung devices page and ensure you have the necessary prerequisites for the installation.

• You can download the latest version of our Samsung Client from the editor interface, from Settings tab by selecting the Download menu and then selecting the installer file
• You can also download the latest version of the application from https://example.domain.com/api/storage/update/jscore/samsung/samsung-client.zip
• If you require a specific version you can achieve that by https://example.domain.com/api/storage/update/jscore/samsung/default/version number/samsung-client.zip
• If you require a specific version with install app feature use https://example.domain.com/api/storage/update/jscore/samsung/default/version number/
  • The https://example.domain.com and version number should be filled out according to your server URL and desired version

Basic installation steps

Before installing the application, it is advised to do the following steps

• Press MENU on your remote
• Reset System Settings via System > Reset System

• Empty Storage via General > Empty Storage

• Set the time via System > Time > Clock Set
• If you want to change the device's time zone through our application later, you need to set the NTP server in System > Time > NTP Settings

• Go to Power Control options via System > Power Control
  • Auto Power On causes the device to switch on automatically when it is connected to the power source. It is useful against power shortages. Switch this on.
  • Max Power Saving turns the monitor off occasionally so we advise you to switch this off.
• Go to Eco Solution via System > Eco Solution
  • Disable Energy Saving Mode, No Signal Power off, and Auto Power off options.

The following steps are required to be able to install the application

1. Set the player type to URL Launcher via System > Play via

2. Go to System > Auto Source Switching
   • Disable Auto Source Switching
3. Press the HOME button on the remote
   • Select URL Launcher Settings option

• Type the URL to the Install Web App section then select OK:

Here is an example URL

https://example.domain.com/api/storage/update/jscore/samsung/

• The application installs and once the installation is complete the application will run automatically.

Please note

If you receive any of the following messages

• Unable to connect to server. Please try again later.
• The server URL is invalid. Enter the correct URL.

Please check if the correct URL is set.
Please also check the device’s time settings. The device requires the correct time to send out requests successfully!

4. Press the Source button on the remote and select the source URL Launcher

• Once the application is running, you need to type the server's URL. The arrow buttons on the remote open the virtual keyboard to let you type with the remote or with an external keyboard. When you finish typing, you can set the server by pressing the Done button on the virtual keyboard. If you exit input mode, you can reenter it by pressing the Enter button on the remote.

After the installation is complete you can register your screen in the editor interface with the four-digit code displayed in the bottom-left corner of the screen.

Installing from a USB device

1. Download the latest version of the application
2. Extract the archive and copy the SSSP folder to a USB device's root.

3. After you plug in the USB device to your SSSP device, select Install from USB Device option and then set the security pin (default is 0000). You need to set this only once.

• The application installation will begin and the application will run automatically when completed.

4. Press the Source button on the remote controller, and select the source URL Launcher

Once the application is running, first you need to type the server's URL. The arrow buttons on the remote controller open the virtual keyboard to let you type with the remote controller or with any external keyboard. When you finished typing, you can set the server by pressing the Done button on the virtual keyboard. If you exit input mode, you can reenter it by pressing the Enter button on the remote controller.

After the installation is complete you can register your screen in the editor interface with the four-digit code displayed in the bottom-left corner of the screen.

Please note

If you receive any of the following messages

• Unable to connect to server. Please try again later.
• The server URL is invalid. Enter the correct URL.

Please check if the correct URL is set.

If you see a red notification in the bottom right corner when attempting to register the device and don’t receive the 4-digit code, it likely means the device’s time settings need to be checked. The device requires the correct time to send out requests successfully!